|
Electric Hot Water Generators are manufactured as a compact electrical
unit, which are available in vertical or horizontal
type models with virtually no maintenance for years, requiring only
connections to Water Supply and Electrical main supply.
The capacity of Generators vary from 15kw. to 2000Kw, depending on the
requirement of the customer. These are most useful for Central Hot Water
in Industrial Complexes , Hotels , Farm Houses / Big residential Buildings
etc .
These Hot Water Generator Come In Different Shapes/sizes And K. Watts As
Specified By The Customer Generators For Recycling Of Water, For Water
Storage etc.. Rc Uses The Latest End Technology With microprocessor based
Step Controller, S.C.R. based proportional controller (stepless) And
Digital Thermometers For More Accuracy And Power
Saving. Thus Making Our Hot Water Generator Maintaince Free. All These Hot
Water Generators Are Pressure Tested in the range of 250-350
P.S.I.G. As Specified By The Customer.
FINANCIAL BENEFITS
One time investment with prolonged trouble free working life leads to
considerable saving, compared to number of
Small Electric Generators used at different spaces in building, Running
cost is much lower than Thermic Fluid and
Steam Heating. Which means Low operation and maintenance cost .
EASY MAINTENANCE
High quality body and shell materials , master welding and fabrication ,
special wiring and Electrical Control Panel,
there is hardly need for time of time maintenance. Simple operation,
involving connection to Water and Electric
Main Supply, can be done by even a layman( but should be done by an
electrician ). In the event of any problem
in replacement of worn out parts , our technicians are promptly deputed at
Sites any where in the Country.
CONSTRUCTIONAL FEATURES
The Generators may be either Vertical or Horizontal Type as per
availability of space for installation at roofs or
basement of Buildings, Body and shell of Water Tank is generally of M.S
Sheets . it can also be of S.S Sheet on
order . Electrical resistance Immersion Type Heating Elements of Copper
Tube Chromplated Heating Elements
are used. High Standard internal wiring and Electrical Control Panel from
an Integral part of Generator's for safe
and automatic control of Hot Water Temperature on continued basis .
|
|
|
Technical Specifications
Shell type: Horizontal / vertical
Material used for construction : mild steel / stainless steel the
shell can also be designed and tested
As per the specified flow rate if desired by the customer.
Pressure testing: 250 - 350 p.s.i.g. Depending on the requirement
of the customer
Insulation : 50 / 100 mm resin bonded thick fiber glass wool with
24 / 32 kg /cube m or as per Specified by the customer. Cladded with 0.8
aluminum sheet.
Heaters specification : 240 v + 10 %, 50 cycle 3 phase A.C. Supply
Flange type ‘u’ tube in copper / stainless steel/ in cloy as
specified by the customer
Controls :
Digital step controller / thermostat for individual step
Digital / dial type thermometer for inlet, outlet pipe ( if using
thermostats for control )
Pressure gauge with ball valve for inlet, outlet pipe
SCR based linear controller ( step less ) for hot water
generators
Safety Features :
Float Switch
Audio / Visual Alarm For Low Water Level
Audio / Visual Alarm For High Temperature.
Pressure Relief Valve.
Door Switch
Safety Thermostat ( Fixed Setting )
|
